Gravel Driveway Calculator › Cost by city › Reno, NV
Gravel Cost in Reno, NV
Gravel for a 12×24 ft gravel driveway in Reno, NV costs about $176 ($150–$203). Local 2026 price is around $47 per ton. Free calculator inside.
What goes into gravel cost in Reno
The line items below are 2026 national averages adjusted by the NV construction-cost factor (×1.05). A written Reno quote is usually built from these pieces — use them to sanity-check any bid line by line before you sign.
| Cost item | Typical Reno price | Unit |
|---|---|---|
| Crushed stone / road base, material | $37 – $63 | per ton |
| Delivery, 10–15 ton dump load | $52 – $158 | per load |
| Spreading & grading labor | $1.05 – $3.15 | per sq ft |
| Geotextile fabric underlayment | $0.32 – $0.63 | per sq ft |
Permit fees are set by the city rather than the market — confirm current fees with the local building department.
Estimate your own Reno project
Prices in Reno, NV run about +5% versus the national average. Enter your dimensions — the calculator starts from the local $47 per ton rate; change it to your supplier's quote for an exact figure.
Material shopping list
- Order about 2.67 cubic yards of gravel.
- Budget about $176 before delivery, taxes, and labor.
- Add 5–10% waste for uneven subgrade, cuts, settling, or spillage.
Formula & assumptions
Area = length x width. Volume = area x depth / 12. Cubic yards = cubic feet / 27. Cost = quantity x local unit price.
- Default depth: 3 inches
- Default price: $47 per ton
- Weight factor: 1.4 tons per cubic yard
These assumptions make the estimate easy for search engines and AI answer tools to verify. Replace the default price with your supplier quote for a local estimate.
Gravel cost in Reno by project size
Material quantities use the local Reno unit price; the last column adds delivery, base prep, and labor at NV-adjusted rates. Click any size for its full breakdown and calculator.
| Project size | You need | Material cost | Installed estimate |
|---|---|---|---|
| 10×20 ft · 3 in | 1.85 cu yd | $122 | $315 – $840 |
| 12×24 ft · 3 in | 2.67 cu yd | $176 | $454 – $1,210 |
| 16×40 ft · 3 in | 5.93 cu yd | $392 | $1,008 – $2,688 |
| 20×40 ft · 3 in | 7.41 cu yd | $490 | $1,260 – $3,360 |
| 20×50 ft · 3 in | 9.26 cu yd | $612 | $1,575 – $4,200 |
| 24×60 ft · 3 in | 13.33 cu yd | $882 | $2,268 – $6,048 |
Installed ranges assume straightforward access and a buildable subgrade; steep, tight, or poor-soil sites price above the top of the range.
Gravel questions Reno homeowners ask
- How much does a gravel driveway cost in Reno?
- Material for a 12×24 ft gravel driveway runs about $176 in Reno. Installed — delivery, spreading, grading, and compaction — expect $454 to $1,210 depending on depth and base work.
- What does gravel cost per ton in Reno?
- Crushed stone and road base run about $37–$63 per ton in the Reno area, plus a delivery fee of $52–$158 per dump-truck load. Larger loads cost less per ton, so one 15-ton delivery beats three small ones.
- How many tons of gravel do I need?
- Multiply length × width × depth (in feet) to get cubic feet, divide by 27 for cubic yards, then multiply by 1.4 — crushed stone weighs about 1.4 tons per cubic yard. The calculator above does this automatically.
- Is geotextile fabric worth it in Reno?
- Over soft or clay-heavy subgrade, yes: stone migrates down into the soil within a few seasons. Fabric costs $0.32–$0.63 per square foot, far less than the first re-graveling.
- How often does a gravel driveway need topping up in Reno?
- Plan on a 1–2 inch top-up every 2–4 years plus occasional regrading to fix ruts and restore the crown — a fraction of the cost of rebuilding a neglected base.
Gravel cost in nearby cities
← Full Gravel Driveway Calculator
Regional estimate = national average adjusted by a NV cost factor. Not a quote. Actual prices vary by site conditions, access, and supplier.