How much does a gravel driveway cost in New York?

Material for a 12×24 ft gravel driveway runs about $218 in New York. Installed — delivery, spreading, grading, and compaction — expect $562 to $1,498 depending on depth and base work.

What does gravel cost per ton in New York?

Crushed stone and road base run about $46–$78 per ton in the New York area, plus a delivery fee of $65–$195 per dump-truck load. Larger loads cost less per ton, so one 15-ton delivery beats three small ones.

How many tons of gravel do I need?

Multiply length × width × depth (in feet) to get cubic feet, divide by 27 for cubic yards, then multiply by 1.4 — crushed stone weighs about 1.4 tons per cubic yard. The calculator above does this automatically.

Is geotextile fabric worth it in New York?

Over soft or clay-heavy subgrade, yes: stone migrates down into the soil within a few seasons. Fabric costs $0.39–$0.78 per square foot, far less than the first re-graveling.

How often does a gravel driveway need topping up in New York?

Freeze-thaw cycles pump fines up and stone down, so plan on a 1–2 inch top-up every 2–3 years plus spring regrading.

Gravel Driveway Calculator › Cost by city › New York, NY

Gravel Cost in New York, NY

Gravel for a 12×24 ft gravel driveway in New York, NY costs about $218 ($186–$251). Local 2026 price is around $58 per ton. Free calculator inside.

Estimated cost — a 12×24 ft gravel driveway

$218

Typical range $186 – $251 · about $58 per ton in New York

Local unit price

$58

You need

2.67 cu yd

State factor

NY ×1.3

What goes into gravel cost in New York

The line items below are 2026 national averages adjusted by the NY construction-cost factor (×1.3). A written New York quote is usually built from these pieces — use them to sanity-check any bid line by line before you sign.

Cost item	Typical New York price	Unit
Crushed stone / road base, material	$46 – $78	per ton
Delivery, 10–15 ton dump load	$65 – $195	per load
Spreading & grading labor	$1.3 – $3.9	per sq ft
Geotextile fabric underlayment	$0.39 – $0.78	per sq ft

Permit fees are set by the city rather than the market — confirm current fees with the local building department.

What’s different about building in New York

Frost heave is the main threat to gravel surfaces in New York: lay geotextile fabric under the base so the stone doesn't pump down into glacial till and compacted urban fill during spring thaw.

Permits: for larger flatwork, driveways, or anything structural, check requirements with NYC Department of Buildings (DOB) before work starts.

Estimate your own New York project

Prices in New York, NY run about +30% versus the national average. Enter your dimensions — the calculator starts from the local $58 per ton rate; change it to your supplier's quote for an exact figure.

Length (ft)

Width (ft)

Depth (in)

Local price (per ton)

You need

2.67 cu yd

Estimated material cost $218

Area

288 sq ft

Volume

72.0 cu ft

Weight

3.73 tons

Material shopping list

Order about 2.67 cubic yards of gravel.
Budget about $218 before delivery, taxes, and labor.
Add 5–10% waste for uneven subgrade, cuts, settling, or spillage.

Formula & assumptions

Area = length x width. Volume = area x depth / 12. Cubic yards = cubic feet / 27. Cost = quantity x local unit price.

Default depth: 3 inches
Default price: $58 per ton
Weight factor: 1.4 tons per cubic yard

These assumptions make the estimate easy for search engines and AI answer tools to verify. Replace the default price with your supplier quote for a local estimate.

Gravel cost in New York by project size

Material quantities use the local New York unit price; the last column adds delivery, base prep, and labor at NY-adjusted rates. Click any size for its full breakdown and calculator.

Project size	You need	Material cost	Installed estimate
10×20 ft · 3 in	1.85 cu yd	$152	$390 – $1,040
12×24 ft · 3 in	2.67 cu yd	$218	$562 – $1,498
16×40 ft · 3 in	5.93 cu yd	$485	$1,248 – $3,328
20×40 ft · 3 in	7.41 cu yd	$607	$1,560 – $4,160
20×50 ft · 3 in	9.26 cu yd	$758	$1,950 – $5,200
24×60 ft · 3 in	13.33 cu yd	$1,092	$2,808 – $7,488

Installed ranges assume straightforward access and a buildable subgrade; steep, tight, or poor-soil sites price above the top of the range.

Gravel questions New York homeowners ask

How much does a gravel driveway cost in New York?: Material for a 12×24 ft gravel driveway runs about $218 in New York. Installed — delivery, spreading, grading, and compaction — expect $562 to $1,498 depending on depth and base work.
What does gravel cost per ton in New York?: Crushed stone and road base run about $46–$78 per ton in the New York area, plus a delivery fee of $65–$195 per dump-truck load. Larger loads cost less per ton, so one 15-ton delivery beats three small ones.
How many tons of gravel do I need?: Multiply length × width × depth (in feet) to get cubic feet, divide by 27 for cubic yards, then multiply by 1.4 — crushed stone weighs about 1.4 tons per cubic yard. The calculator above does this automatically.
Is geotextile fabric worth it in New York?: Over soft or clay-heavy subgrade, yes: stone migrates down into the soil within a few seasons. Fabric costs $0.39–$0.78 per square foot, far less than the first re-graveling.
How often does a gravel driveway need topping up in New York?: Freeze-thaw cycles pump fines up and stone down, so plan on a 1–2 inch top-up every 2–3 years plus spring regrading.

Gravel cost in nearby cities

Buffalo, NY Rochester, NY Yonkers, NY Los Angeles, CA Chicago, IL Houston, TX Phoenix, AZ Philadelphia, PA

← Full Gravel Driveway Calculator

Regional estimate = national average adjusted by a NY cost factor. Not a quote. Actual prices vary by site conditions, access, and supplier.