Gravel Driveway Calculator › Cost by city › Kansas City, KS
Gravel Cost in Kansas City, KS
Gravel for a 12×24 ft gravel driveway in Kansas City, KS costs about $156 ($133–$180). Local 2026 price is around $42 per ton. Free calculator inside.
What goes into gravel cost in Kansas City
The line items below are 2026 national averages adjusted by the KS construction-cost factor (×0.93). A written Kansas City quote is usually built from these pieces — use them to sanity-check any bid line by line before you sign.
| Cost item | Typical Kansas City price | Unit |
|---|---|---|
| Crushed stone / road base, material | $33 – $56 | per ton |
| Delivery, 10–15 ton dump load | $46 – $140 | per load |
| Spreading & grading labor | $0.93 – $2.79 | per sq ft |
| Geotextile fabric underlayment | $0.28 – $0.56 | per sq ft |
Permit fees are set by the city rather than the market — confirm current fees with the local building department.
Estimate your own Kansas City project
Prices in Kansas City, KS run about -7% versus the national average. Enter your dimensions — the calculator starts from the local $42 per ton rate; change it to your supplier's quote for an exact figure.
Material shopping list
- Order about 2.67 cubic yards of gravel.
- Budget about $156 before delivery, taxes, and labor.
- Add 5–10% waste for uneven subgrade, cuts, settling, or spillage.
Formula & assumptions
Area = length x width. Volume = area x depth / 12. Cubic yards = cubic feet / 27. Cost = quantity x local unit price.
- Default depth: 3 inches
- Default price: $42 per ton
- Weight factor: 1.4 tons per cubic yard
These assumptions make the estimate easy for search engines and AI answer tools to verify. Replace the default price with your supplier quote for a local estimate.
Gravel cost in Kansas City by project size
Material quantities use the local Kansas City unit price; the last column adds delivery, base prep, and labor at KS-adjusted rates. Click any size for its full breakdown and calculator.
| Project size | You need | Material cost | Installed estimate |
|---|---|---|---|
| 10×20 ft · 3 in | 1.85 cu yd | $108 | $279 – $744 |
| 12×24 ft · 3 in | 2.67 cu yd | $156 | $402 – $1,071 |
| 16×40 ft · 3 in | 5.93 cu yd | $347 | $893 – $2,381 |
| 20×40 ft · 3 in | 7.41 cu yd | $434 | $1,116 – $2,976 |
| 20×50 ft · 3 in | 9.26 cu yd | $542 | $1,395 – $3,720 |
| 24×60 ft · 3 in | 13.33 cu yd | $781 | $2,009 – $5,357 |
Installed ranges assume straightforward access and a buildable subgrade; steep, tight, or poor-soil sites price above the top of the range.
Gravel questions Kansas City homeowners ask
- How much does a gravel driveway cost in Kansas City?
- Material for a 12×24 ft gravel driveway runs about $156 in Kansas City. Installed — delivery, spreading, grading, and compaction — expect $402 to $1,071 depending on depth and base work.
- What does gravel cost per ton in Kansas City?
- Crushed stone and road base run about $33–$56 per ton in the Kansas City area, plus a delivery fee of $46–$140 per dump-truck load. Larger loads cost less per ton, so one 15-ton delivery beats three small ones.
- How many tons of gravel do I need?
- Multiply length × width × depth (in feet) to get cubic feet, divide by 27 for cubic yards, then multiply by 1.4 — crushed stone weighs about 1.4 tons per cubic yard. The calculator above does this automatically.
- Is geotextile fabric worth it in Kansas City?
- Over soft or clay-heavy subgrade, yes: stone migrates down into the soil within a few seasons. Fabric costs $0.28–$0.56 per square foot, far less than the first re-graveling.
- How often does a gravel driveway need topping up in Kansas City?
- Plan on a 1–2 inch top-up every 2–4 years plus occasional regrading to fix ruts and restore the crown — a fraction of the cost of rebuilding a neglected base.
Gravel cost in nearby cities
← Full Gravel Driveway Calculator
Regional estimate = national average adjusted by a KS cost factor. Not a quote. Actual prices vary by site conditions, access, and supplier.