How much does a gravel driveway cost in Killeen?

Material for a 12×24 ft gravel driveway runs about $163 in Killeen. Installed — delivery, spreading, grading, and compaction — expect $419 to $1,117 depending on depth and base work.

What does gravel cost per ton in Killeen?

Crushed stone and road base run about $34–$58 per ton in the Killeen area, plus a delivery fee of $48–$146 per dump-truck load. Larger loads cost less per ton, so one 15-ton delivery beats three small ones.

How many tons of gravel do I need?

Multiply length × width × depth (in feet) to get cubic feet, divide by 27 for cubic yards, then multiply by 1.4 — crushed stone weighs about 1.4 tons per cubic yard. The calculator above does this automatically.

Is geotextile fabric worth it in Killeen?

Yes — over expansive Blackland-type clay over shallow limestone, stone gets pumped down into the subgrade within a couple of seasons. Fabric costs $0.29–$0.58 per square foot, far less than the first re-graveling.

How often does a gravel driveway need topping up in Killeen?

Plan on a 1–2 inch top-up every 2–4 years plus occasional regrading to fix ruts and restore the crown — a fraction of the cost of rebuilding a neglected base.

Gravel Driveway Calculator › Cost by city › Killeen, TX

Gravel Cost in Killeen, TX

Gravel for a 12×24 ft gravel driveway in Killeen, TX costs about $163 ($139–$187). Local 2026 price is around $44 per ton. Free calculator inside.

Estimated cost — a 12×24 ft gravel driveway

$163

Typical range $139 – $187 · about $44 per ton in Killeen

Local unit price

$44

You need

2.67 cu yd

State factor

TX ×0.97

What goes into gravel cost in Killeen

The line items below are 2026 national averages adjusted by the TX construction-cost factor (×0.97). A written Killeen quote is usually built from these pieces — use them to sanity-check any bid line by line before you sign.

Cost item	Typical Killeen price	Unit
Crushed stone / road base, material	$34 – $58	per ton
Delivery, 10–15 ton dump load	$48 – $146	per load
Spreading & grading labor	$0.97 – $2.91	per sq ft
Geotextile fabric underlayment	$0.29 – $0.58	per sq ft

Permit fees are set by the city rather than the market — confirm current fees with the local building department.

What’s different about building in Killeen

Over expansive Blackland-type clay over shallow limestone, gravel disappears into the subgrade within a couple of seasons unless you use fabric and a thicker (6-inch-plus) compacted base. Budget the fabric — it costs less than the first re-graveling.

Permits: for larger flatwork, driveways, or anything structural, check requirements with City of Killeen Development Services before work starts.

Estimate your own Killeen project

Prices in Killeen, TX run about -3% versus the national average. Enter your dimensions — the calculator starts from the local $44 per ton rate; change it to your supplier's quote for an exact figure.

Length (ft)

Width (ft)

Depth (in)

Local price (per ton)

You need

2.67 cu yd

Estimated material cost $163

Area

288 sq ft

Volume

72.0 cu ft

Weight

3.73 tons

Material shopping list

Order about 2.67 cubic yards of gravel.
Budget about $163 before delivery, taxes, and labor.
Add 5–10% waste for uneven subgrade, cuts, settling, or spillage.

Formula & assumptions

Area = length x width. Volume = area x depth / 12. Cubic yards = cubic feet / 27. Cost = quantity x local unit price.

Default depth: 3 inches
Default price: $44 per ton
Weight factor: 1.4 tons per cubic yard

These assumptions make the estimate easy for search engines and AI answer tools to verify. Replace the default price with your supplier quote for a local estimate.

Gravel cost in Killeen by project size

Material quantities use the local Killeen unit price; the last column adds delivery, base prep, and labor at TX-adjusted rates. Click any size for its full breakdown and calculator.

Project size	You need	Material cost	Installed estimate
10×20 ft · 3 in	1.85 cu yd	$113	$291 – $776
12×24 ft · 3 in	2.67 cu yd	$163	$419 – $1,117
16×40 ft · 3 in	5.93 cu yd	$362	$931 – $2,483
20×40 ft · 3 in	7.41 cu yd	$453	$1,164 – $3,104
20×50 ft · 3 in	9.26 cu yd	$566	$1,455 – $3,880
24×60 ft · 3 in	13.33 cu yd	$815	$2,095 – $5,587

Installed ranges assume straightforward access and a buildable subgrade; steep, tight, or poor-soil sites price above the top of the range.

Gravel questions Killeen homeowners ask

How much does a gravel driveway cost in Killeen?: Material for a 12×24 ft gravel driveway runs about $163 in Killeen. Installed — delivery, spreading, grading, and compaction — expect $419 to $1,117 depending on depth and base work.
What does gravel cost per ton in Killeen?: Crushed stone and road base run about $34–$58 per ton in the Killeen area, plus a delivery fee of $48–$146 per dump-truck load. Larger loads cost less per ton, so one 15-ton delivery beats three small ones.
How many tons of gravel do I need?: Multiply length × width × depth (in feet) to get cubic feet, divide by 27 for cubic yards, then multiply by 1.4 — crushed stone weighs about 1.4 tons per cubic yard. The calculator above does this automatically.
Is geotextile fabric worth it in Killeen?: Yes — over expansive Blackland-type clay over shallow limestone, stone gets pumped down into the subgrade within a couple of seasons. Fabric costs $0.29–$0.58 per square foot, far less than the first re-graveling.
How often does a gravel driveway need topping up in Killeen?: Plan on a 1–2 inch top-up every 2–4 years plus occasional regrading to fix ruts and restore the crown — a fraction of the cost of rebuilding a neglected base.

Gravel cost in nearby cities

Houston, TX San Antonio, TX Dallas, TX Austin, TX Fort Worth, TX El Paso, TX Arlington, TX Corpus Christi, TX

← Full Gravel Driveway Calculator

Regional estimate = national average adjusted by a TX cost factor. Not a quote. Actual prices vary by site conditions, access, and supplier.