Concrete Calculator › Cost by city › Miami, FL
Concrete Cost in Miami, FL
Concrete for a 20×20 ft (400 sq ft) 4-inch concrete slab in Miami, FL costs about $726 ($617–$835). Local 2026 price is around $147 per cuyd. Free calculator inside.
What goes into concrete cost in Miami
The line items below are 2026 national averages adjusted by the FL construction-cost factor (×0.98). A written Miami quote is usually built from these pieces — use them to sanity-check any bid line by line before you sign.
| Cost item | Typical Miami price | Unit |
|---|---|---|
| Ready-mix concrete, 3,000–4,000 PSI | $147 – $181 | per cu yd delivered |
| Labor: forming, pouring & finishing | $3.92 – $7.84 | per sq ft |
| Gravel base & subgrade prep | $0.98 – $1.96 | per sq ft |
| Wire mesh / rebar reinforcement | $0.34 – $0.98 | per sq ft |
| Short-load fee (orders under ~4 cu yd) | $74 – $147 | per delivery |
| Residential flatwork permit | $49 – $294 | per project |
Permit fees are set by the city rather than the market — confirm current fees with the local building department.
What’s different about building in Miami
Miami has no meaningful frost line — code still requires footings to bear about 12 inches into undisturbed soil, but frost heave is not the design problem it is up north. Check specifics with Miami-Dade County RER building department.
Heat is the practical constraint: in Miami summers, crews schedule pours for early morning and keep the slab wet-cured for several days so it gains strength instead of flash-drying.
Permitting under the Florida Building Code's High-Velocity Hurricane Zone rules is stricter and slower than most of the country — build review time into the schedule.
Permits: for larger flatwork, driveways, or anything structural, check requirements with Miami-Dade County RER building department before work starts.
Estimate your own Miami project
Prices in Miami, FL run about -2% versus the national average. Enter your dimensions — the calculator starts from the local $147 per cuyd rate; change it to your supplier's quote for an exact figure.
Material shopping list
- Order about 4.94 cubic yards of concrete.
- Budget about $726 before delivery, taxes, and labor.
- Add 5–10% waste for uneven subgrade, cuts, settling, or spillage.
Formula & assumptions
Area = length x width. Volume = area x depth / 12. Cubic yards = cubic feet / 27. Cost = quantity x local unit price.
- Default depth: 4 inches
- Default price: $147 per cuyd
- 80-lb bags yield: 0.6 cu ft each
These assumptions make the estimate easy for search engines and AI answer tools to verify. Replace the default price with your supplier quote for a local estimate.
Concrete cost in Miami by project size
Material quantities use the local Miami unit price; the last column adds delivery, base prep, and labor at FL-adjusted rates. Click any size for its full breakdown and calculator.
| Project size | You need | Material cost | Installed estimate |
|---|---|---|---|
| 10×10 ft · 4 in | 1.23 cu yd | $181 | $588 – $980 |
| 12×12 ft · 4 in | 1.78 cu yd | $261 | $847 – $1,411 |
| 12×16 ft · 4 in | 2.37 cu yd | $348 | $1,129 – $1,882 |
| 16×20 ft · 4 in | 3.95 cu yd | $581 | $1,882 – $3,136 |
| 20×20 ft · 4 in | 4.94 cu yd | $726 | $2,352 – $3,920 |
| 24×24 ft · 4 in | 7.11 cu yd | $1,045 | $3,387 – $5,645 |
| 30×40 ft · 4 in | 14.81 cu yd | $2,178 | $7,056 – $11,760 |
| 40×50 ft · 4 in | 24.69 cu yd | $3,630 | $11,760 – $19,600 |
Installed ranges assume straightforward access and a buildable subgrade; steep, tight, or poor-soil sites price above the top of the range.
Concrete questions Miami homeowners ask
- How much does a concrete slab cost in Miami?
- Materials alone for a 20×20 ft (400 sq ft) 4-inch concrete slab run about $726 in Miami. Fully installed — gravel base, forms, reinforcement, labor, and finishing — most homeowners pay $2,352 to $3,920 for the same slab, roughly $5.88–$9.8 per square foot.
- What does ready-mix concrete cost per yard in Miami?
- Plan on $147–$181 per cubic yard delivered for a standard 3,000–4,000 PSI mix in the Miami area. Orders under about 4 cubic yards usually add a short-load fee of $74–$147, so small pours cost noticeably more per yard.
- Do I need a permit to pour a concrete slab in Miami?
- Driveways, sidewalks, and anything structural almost always require one; small detached patio pads sometimes fall under the permit threshold. Confirm with Miami-Dade County RER building department before you pour — a permit costs far less than being ordered to remove finished work.
- Is it cheaper to pour concrete myself in Miami?
- Labor and finishing account for $3.92–$7.84 per square foot of the installed price, so DIY can roughly halve the cost of a simple pad. But concrete is unforgiving: once the truck arrives you have under two hours to place, screed, and finish. Most first-timers cap DIY at about 100–150 square feet.
- When is the best time of year to pour concrete in Miami?
- In Miami's heat, crews pour early in the morning and keep the slab wet-cured for several days so it gains strength instead of flash-drying. Spring and fall give the easiest cures; summer pours are routine here but demand tighter timing.
- How can I save money on concrete in Miami?
- Combine small pours into one delivery to clear the short-load threshold, handle your own excavation and gravel base, and collect at least three written Miami quotes — 30% spreads between local bids are normal.
Concrete cost in nearby cities
Regional estimate = national average adjusted by a FL cost factor. Not a quote. Actual prices vary by site conditions, access, and supplier.