Concrete Calculator › 10×10 slab

Concrete for a 10×10 Slab at 6 inches

A 10×10 slab (100 sq ft) at 6 inches needs about 1.85 cubic yards of concrete — roughly $278. See the full breakdown.

You need
1.85 cu yd
Estimated material cost $278
Area
100 sq ft
Volume
50.0 cu ft
80-lb bags
84
Advertisement

Adjust for your project

You need
1.85 cu yd
Estimated material cost $278
Area
100 sq ft
Volume
50.0 cu ft
80-lb bags
84

Material shopping list

  • Order about 1.85 cubic yards of concrete.
  • Budget about $278 before delivery, taxes, and labor.
  • Add 5–10% waste for uneven subgrade, cuts, settling, or spillage.

Formula & assumptions

Area = length x width. Volume = area x depth / 12. Cubic yards = cubic feet / 27. Cost = quantity x local unit price.

  • Default depth: 4 inches
  • Default price: $150 per cuyd
  • 80-lb bags yield: 0.6 cu ft each

These assumptions make the estimate easy for search engines and AI answer tools to verify. Replace the default price with your supplier quote for a local estimate.

Common questions about a 10×10 slab

How many bags of concrete do I need for a 10×10 slab at 6 inches?
You need 50.0 cubic feet: about 84 80-lb bags, 112 60-lb bags, or 167 40-lb bags. At that count, ready-mix delivery is cheaper, faster, and gives a consistent mix — bags make sense only if truck access is impossible.
How much weight can a 6-inch concrete slab hold?
A 6-inch slab over compacted base with rebar handles pickups, trailers, and most residential equipment loads. Commercial vehicle traffic or heavy point loads call for engineered thickness and reinforcement.
Should I pour thicker than 6 inches?
At 6 inches this slab already covers residential vehicle duty. Extra thickness past 6 inches buys little for a home project — proper base compaction, edge thickening, and cure time matter more.
Do I need rebar or wire mesh?
For patios and walkways, fiber-reinforced mix or wire mesh controls cracking fine. For driveways and anything carrying vehicles, use #3 or #4 rebar on an 18–24 inch grid, set on chairs at mid-slab — mesh stomped to the bottom of the pour does nothing.

Based on $150 per cuyd national average. Enter your local price for an exact quote. Estimate only.