Asphalt Driveway Cost Calculator › Cost by city › Saint Paul, MN
Asphalt Cost in Saint Paul, MN
Asphalt for a 20×40 ft (800 sq ft) asphalt driveway in Saint Paul, MN costs about $4,456 ($3,788–$5,124). Local 2026 price is around $6 per sq ft installed. Free calculator inside.
What goes into asphalt cost in Saint Paul
The line items below are 2026 national averages adjusted by the MN construction-cost factor (×1.06). A written Saint Paul quote is usually built from these pieces — use them to sanity-check any bid line by line before you sign.
| Cost item | Typical Saint Paul price | Unit |
|---|---|---|
| Hot-mix asphalt, material only | $106 – $170 | per ton |
| Installed: 2–3 in overlay on sound base | $3.18 – $5.3 | per sq ft |
| Installed: full new build incl. gravel base | $5.3 – $7.42 | per sq ft |
| Tear-out of old driveway | $1.06 – $3.18 | per sq ft |
| Sealcoating (every 2–4 years) | $0.21 – $0.58 | per sq ft |
Permit fees are set by the city rather than the market — confirm current fees with the local building department.
Estimate your own Saint Paul project
Prices in Saint Paul, MN run about +6% versus the national average. Enter your dimensions — the calculator starts from the local $6 per sq ft installed rate; change it to your supplier's quote for an exact figure.
Material shopping list
- Order about 14.5 tons of asphalt.
- Budget about $4,456 before delivery, taxes, and labor.
- Add 5–10% waste for uneven subgrade, cuts, settling, or spillage.
Formula & assumptions
Area = length x width. Asphalt tons = area x depth / 12 x 145 lb/cu ft / 2,000. Cost = area x local installed price per sq ft.
- Residential asphalt density: 145 lb per cubic foot
- Default depth: 3 inches
- Default installed price: $6 per sq ft installed
These assumptions make the estimate easy for search engines and AI answer tools to verify. Replace the default price with your supplier quote for a local estimate.
Asphalt cost in Saint Paul by project size
Material quantities use the local Saint Paul unit price; the last column adds delivery, base prep, and labor at MN-adjusted rates. Click any size for its full breakdown and calculator.
| Project size | You need | Material cost | Installed estimate |
|---|---|---|---|
| 10×20 ft · 3 in | 3.62 tons | $1,114 | $636 – $1,484 |
| 12×24 ft · 3 in | 5.22 tons | $1,604 | $916 – $2,137 |
| 16×40 ft · 3 in | 11.6 tons | $3,565 | $2,035 – $4,749 |
| 20×40 ft · 3 in | 14.5 tons | $4,456 | $2,544 – $5,936 |
| 20×50 ft · 3 in | 18.12 tons | $5,570 | $3,180 – $7,420 |
| 24×60 ft · 3 in | 26.1 tons | $8,021 | $4,579 – $10,685 |
Installed ranges assume straightforward access and a buildable subgrade; steep, tight, or poor-soil sites price above the top of the range.
Asphalt questions Saint Paul homeowners ask
- How much does an asphalt driveway cost in Saint Paul?
- At the local average of about $5.57 per square foot installed, a 20×40 ft (800 sq ft) asphalt driveway runs $4,456. Quotes typically land between $2,544 and $5,936 depending on base condition and whether old pavement must come out.
- What does asphalt cost per square foot in Saint Paul?
- Resurfacing over a sound existing base runs about $3.18–$5.3 per square foot in the Saint Paul market; a full new build with excavation and a compacted gravel base runs $5.3–$7.42. Tear-out of an old driveway adds $1.06–$3.18.
- Is asphalt or concrete cheaper in Saint Paul?
- Asphalt installs for $3.18–$7.42 per square foot versus $6.36–$10.6 for concrete, so it wins upfront. The trade-off is upkeep: asphalt wants sealcoating every 2–4 years and lasts 15–25 years, while concrete commonly runs 30-plus.
- Do I need a permit to pave a driveway in Saint Paul?
- Usually yes when the driveway meets a public street or sidewalk — the apron is in the right-of-way. Check with the Saint Paul building department; many contractors pull the permit as part of the job.
- How long does an asphalt driveway last in Saint Paul?
- 15–25 years with a proper base and regular sealcoating. Drainage decides which end of that range you get: water standing on or under the mat is what kills asphalt, so keep a 2% slope and seal cracks yearly.
- Should I resurface or fully replace?
- If the base is sound and less than about a third of the surface is cracked, a 1.5–2 inch overlay at $2.12–$3.71 per square foot buys another decade. Widespread alligator cracking or soft spots mean the base has failed — overlaying it just resurfaces the problem.
Asphalt cost in nearby cities
← Full Asphalt Driveway Cost Calculator
Regional estimate = national average adjusted by a MN cost factor. Not a quote. Actual prices vary by site conditions, access, and supplier.