Asphalt Driveway Cost Calculator › Cost by city › Oklahoma City, OK
Asphalt Cost in Oklahoma City, OK
Asphalt for a 20×40 ft (800 sq ft) asphalt driveway in Oklahoma City, OK costs about $3,784 ($3,216–$4,352). Local 2026 price is around $5 per sq ft installed. Free calculator inside.
What goes into asphalt cost in Oklahoma City
The line items below are 2026 national averages adjusted by the OK construction-cost factor (×0.9). A written Oklahoma City quote is usually built from these pieces — use them to sanity-check any bid line by line before you sign.
| Cost item | Typical Oklahoma City price | Unit |
|---|---|---|
| Hot-mix asphalt, material only | $90 – $144 | per ton |
| Installed: 2–3 in overlay on sound base | $2.7 – $4.5 | per sq ft |
| Installed: full new build incl. gravel base | $4.5 – $6.3 | per sq ft |
| Tear-out of old driveway | $0.9 – $2.7 | per sq ft |
| Sealcoating (every 2–4 years) | $0.18 – $0.5 | per sq ft |
Permit fees are set by the city rather than the market — confirm current fees with the local building department.
Estimate your own Oklahoma City project
Prices in Oklahoma City, OK run about -10% versus the national average. Enter your dimensions — the calculator starts from the local $5 per sq ft installed rate; change it to your supplier's quote for an exact figure.
Material shopping list
- Order about 14.5 tons of asphalt.
- Budget about $3,784 before delivery, taxes, and labor.
- Add 5–10% waste for uneven subgrade, cuts, settling, or spillage.
Formula & assumptions
Area = length x width. Asphalt tons = area x depth / 12 x 145 lb/cu ft / 2,000. Cost = area x local installed price per sq ft.
- Residential asphalt density: 145 lb per cubic foot
- Default depth: 3 inches
- Default installed price: $5 per sq ft installed
These assumptions make the estimate easy for search engines and AI answer tools to verify. Replace the default price with your supplier quote for a local estimate.
Asphalt cost in Oklahoma City by project size
Material quantities use the local Oklahoma City unit price; the last column adds delivery, base prep, and labor at OK-adjusted rates. Click any size for its full breakdown and calculator.
| Project size | You need | Material cost | Installed estimate |
|---|---|---|---|
| 10×20 ft · 3 in | 3.62 tons | $946 | $540 – $1,260 |
| 12×24 ft · 3 in | 5.22 tons | $1,362 | $778 – $1,814 |
| 16×40 ft · 3 in | 11.6 tons | $3,027 | $1,728 – $4,032 |
| 20×40 ft · 3 in | 14.5 tons | $3,784 | $2,160 – $5,040 |
| 20×50 ft · 3 in | 18.12 tons | $4,730 | $2,700 – $6,300 |
| 24×60 ft · 3 in | 26.1 tons | $6,811 | $3,888 – $9,072 |
Installed ranges assume straightforward access and a buildable subgrade; steep, tight, or poor-soil sites price above the top of the range.
Asphalt questions Oklahoma City homeowners ask
- How much does an asphalt driveway cost in Oklahoma City?
- At the local average of about $4.73 per square foot installed, a 20×40 ft (800 sq ft) asphalt driveway runs $3,784. Quotes typically land between $2,160 and $5,040 depending on base condition and whether old pavement must come out.
- What does asphalt cost per square foot in Oklahoma City?
- Resurfacing over a sound existing base runs about $2.7–$4.5 per square foot in the Oklahoma City market; a full new build with excavation and a compacted gravel base runs $4.5–$6.3. Tear-out of an old driveway adds $0.9–$2.7.
- Is asphalt or concrete cheaper in Oklahoma City?
- Asphalt installs for $2.7–$6.3 per square foot versus $5.4–$9 for concrete, so it wins upfront. The trade-off is upkeep: asphalt wants sealcoating every 2–4 years and lasts 15–25 years, while concrete commonly runs 30-plus.
- Do I need a permit to pave a driveway in Oklahoma City?
- Usually yes when the driveway meets a public street or sidewalk — the apron is in the right-of-way. Check with the Oklahoma City building department; many contractors pull the permit as part of the job.
- How long does an asphalt driveway last in Oklahoma City?
- 15–25 years with a proper base and regular sealcoating. Drainage decides which end of that range you get: water standing on or under the mat is what kills asphalt, so keep a 2% slope and seal cracks yearly.
- Should I resurface or fully replace?
- If the base is sound and less than about a third of the surface is cracked, a 1.5–2 inch overlay at $1.8–$3.15 per square foot buys another decade. Widespread alligator cracking or soft spots mean the base has failed — overlaying it just resurfaces the problem.
Asphalt cost in nearby cities
← Full Asphalt Driveway Cost Calculator
Regional estimate = national average adjusted by a OK cost factor. Not a quote. Actual prices vary by site conditions, access, and supplier.