Asphalt Driveway Cost Calculator › Cost by city › Bakersfield, CA
Asphalt Cost in Bakersfield, CA
Asphalt for a 20×40 ft (800 sq ft) asphalt driveway in Bakersfield, CA costs about $5,376 ($4,570–$6,182). Local 2026 price is around $7 per sq ft installed. Free calculator inside.
What goes into asphalt cost in Bakersfield
The line items below are 2026 national averages adjusted by the CA construction-cost factor (×1.28). A written Bakersfield quote is usually built from these pieces — use them to sanity-check any bid line by line before you sign.
| Cost item | Typical Bakersfield price | Unit |
|---|---|---|
| Hot-mix asphalt, material only | $128 – $205 | per ton |
| Installed: 2–3 in overlay on sound base | $3.84 – $6.4 | per sq ft |
| Installed: full new build incl. gravel base | $6.4 – $8.96 | per sq ft |
| Tear-out of old driveway | $1.28 – $3.84 | per sq ft |
| Sealcoating (every 2–4 years) | $0.26 – $0.7 | per sq ft |
Permit fees are set by the city rather than the market — confirm current fees with the local building department.
Estimate your own Bakersfield project
Prices in Bakersfield, CA run about +28% versus the national average. Enter your dimensions — the calculator starts from the local $7 per sq ft installed rate; change it to your supplier's quote for an exact figure.
Material shopping list
- Order about 14.5 tons of asphalt.
- Budget about $5,376 before delivery, taxes, and labor.
- Add 5–10% waste for uneven subgrade, cuts, settling, or spillage.
Formula & assumptions
Area = length x width. Asphalt tons = area x depth / 12 x 145 lb/cu ft / 2,000. Cost = area x local installed price per sq ft.
- Residential asphalt density: 145 lb per cubic foot
- Default depth: 3 inches
- Default installed price: $7 per sq ft installed
These assumptions make the estimate easy for search engines and AI answer tools to verify. Replace the default price with your supplier quote for a local estimate.
Asphalt cost in Bakersfield by project size
Material quantities use the local Bakersfield unit price; the last column adds delivery, base prep, and labor at CA-adjusted rates. Click any size for its full breakdown and calculator.
| Project size | You need | Material cost | Installed estimate |
|---|---|---|---|
| 10×20 ft · 3 in | 3.62 tons | $1,344 | $768 – $1,792 |
| 12×24 ft · 3 in | 5.22 tons | $1,935 | $1,106 – $2,580 |
| 16×40 ft · 3 in | 11.6 tons | $4,301 | $2,458 – $5,734 |
| 20×40 ft · 3 in | 14.5 tons | $5,376 | $3,072 – $7,168 |
| 20×50 ft · 3 in | 18.12 tons | $6,720 | $3,840 – $8,960 |
| 24×60 ft · 3 in | 26.1 tons | $9,677 | $5,530 – $12,902 |
Installed ranges assume straightforward access and a buildable subgrade; steep, tight, or poor-soil sites price above the top of the range.
Asphalt questions Bakersfield homeowners ask
- How much does an asphalt driveway cost in Bakersfield?
- At the local average of about $6.72 per square foot installed, a 20×40 ft (800 sq ft) asphalt driveway runs $5,376. Quotes typically land between $3,072 and $7,168 depending on base condition and whether old pavement must come out.
- What does asphalt cost per square foot in Bakersfield?
- Resurfacing over a sound existing base runs about $3.84–$6.4 per square foot in the Bakersfield market; a full new build with excavation and a compacted gravel base runs $6.4–$8.96. Tear-out of an old driveway adds $1.28–$3.84.
- Is asphalt or concrete cheaper in Bakersfield?
- Asphalt installs for $3.84–$8.96 per square foot versus $7.68–$12.8 for concrete, so it wins upfront. The trade-off is upkeep: asphalt wants sealcoating every 2–4 years and lasts 15–25 years, while concrete commonly runs 30-plus.
- Do I need a permit to pave a driveway in Bakersfield?
- Usually yes when the driveway meets a public street or sidewalk — the apron is in the right-of-way. Check with the Bakersfield building department; many contractors pull the permit as part of the job.
- How long does an asphalt driveway last in Bakersfield?
- 15–25 years with a proper base and regular sealcoating. Drainage decides which end of that range you get: water standing on or under the mat is what kills asphalt, so keep a 2% slope and seal cracks yearly.
- Should I resurface or fully replace?
- If the base is sound and less than about a third of the surface is cracked, a 1.5–2 inch overlay at $2.56–$4.48 per square foot buys another decade. Widespread alligator cracking or soft spots mean the base has failed — overlaying it just resurfaces the problem.
Asphalt cost in nearby cities
← Full Asphalt Driveway Cost Calculator
Regional estimate = national average adjusted by a CA cost factor. Not a quote. Actual prices vary by site conditions, access, and supplier.